大连注塑成型
Your current location : Home >>  news >> Industry news

Contact UsContact Us

Dalian Jinghe Molding Co., Ltd

Dalian Chenghua plastic products Co., Ltd

Tel:0411-87840676

Fax:0411-87840576

Web:www.dlchenghua.cn/en

E-mail:office@dlchenghua.cn

              office@dljinghe.com

Add:No. 343, Jinwan Road, Zhanqian Street (Majia New Village), Jinzhou District, Dalian

Dalian Injection Molding: Resin Grade Selection by Service Conditions?

release date:2026-10-10 00:00 source: http://www.dlchenghua.cn Click:

Dalian injection molding material grade selection shall consider product load, service temperature, contacting media and storage & transportation environment. Plastic grades directly determine the molded parts’ mechanical properties, aging resistance and corrosion resistance. Improper grades cause cracking, deformation and surface defects, failing service requirements. Before launching a Dalian injection molding project, collect operating parameters including load, impact, ambient temperature and contact media, which forms the basis of resin grade selection. Dalian is a coastal region with salt-laden air and salt spray erosion. For outdoor or semi-outdoor molded products, weathering and salt-spray aging resistance must be considered in material selection to prevent yellowing and embrittlement after long-term service, a key distinction from inland injection molding.


Indoor low-load products include housings, decorative covers and ordinary support bases, bearing only static load without continuous impact, used at room temperature indoors and free from strong chemicals. General-purpose plastics such as PP and ABS are applicable. Conventional PP features good toughness, light weight and favorable flowability, suitable for thin-wall shells with low cost. ABS boasts high rigidity and good surface finish, facilitating subsequent painting and silk-screen printing for parts with high appearance requirements. For long-term storage in Dalian warehouses, antioxidants may be added to retard aging. These materials are easy to mold with low mold wear and fit mass production. Check snap-fit design; some general grades have poor low-temperature toughness and snap joints tend to crack in winter. High-impact modified grades can be adopted as an upgrade.


Components under alternating load and impact include equipment fittings, drive guards and hand tool housings, subject to repeated bending and instantaneous impact. Modified PP and PC/ABS alloy are preferred. PC/ABS combines PC’s impact resistance and ABS’s processability, retaining toughness at low temperatures to reduce brittle fracture risk in Dalian’s cold winters. Elastomer-toughened modified PP delivers enhanced impact resistance and stress-cracking resistance, widely used for pipe fittings and small equipment guards. Alloy materials require sufficient drying. High moisture in PC causes silver streaks and bubbles. Due to high local humidity in Dalian, raw materials shall be moisture-proof during storage and fully dried before molding.


Products exposed outdoors under sunlight and salt spray, such as outdoor equipment housings, guardrail fittings and instrument enclosures, adopt weather-resistant modified grades including weather-proof PP, ASA and weather-resistant PC. ASA has outstanding UV resistance, resisting fading and chalking with excellent salt spray performance for Dalian coastal outdoor conditions. Ordinary ABS is unsuitable for long-term outdoor use and will rapidly embrittle under UV radiation. Weather-resistant grades contain built-in UV stabilizers and anti-aging additives to suppress molecular degradation triggered by UV and salt spray. Compatibility with color masterbatch shall also be checked; matched weather-resistant masterbatch prevents color shift over time.


Parts contacting acid, alkali, oil and grease, such as chemical liners, chemical transfer connectors and cleaning equipment components, select chemically resistant grades: PP, PVDF and HDPE. PP resists weak acids, alkalis and oil with easy processing. PVDF features superior corrosion resistance and high-temperature tolerance for harsh chemical media at higher material cost. PVDF molding requires high processing temperature; injection screw and barrel need anti-corrosion treatment and molds require surface finishing. Stress relief shall be performed after molding to avoid stress cracking induced by chemical media.


For high-temperature applications such as hot water pipes and heat-resistant equipment housings with continuous operating temperature above 80℃, glass-fiber reinforced PP, PPS and heat-resistant PC are selected. Glass fiber reinforcement raises heat deflection temperature and rigidity yet reduces toughness. Sharp corners shall be avoided in product design to mitigate stress concentration. Glass-filled materials cause mold abrasion; molds require quenching and hardening to reduce wear.


Production volume is another key factor. Mass-produced standard products prioritize widely available general grades for stable supply and lower unit cost. Small-batch prototypes may use custom modified grades with higher minimum order quantity and longer lead time. Evaluate secondary processes: materials shall be compatible with bonding, painting or ultrasonic welding; some modified plastics show poor weldability.


After grade confirmation, mold trials are carried out. Check molded appearance, dimensions and mechanical properties during trials. Salt spray aging and thermal cycling tests are conducted if needed to verify grade suitability. Raw material storage must adapt to Dalian’s humid climate. Store materials in dry warehouses with sealed packages to prevent moisture absorption and quality defects.


Select proper resin grades for Dalian injection molding by comprehensively evaluating load, impact, service temperature, contact media, outdoor exposure, secondary processing requirements and production volume, together with Dalian’s coastal salt spray and cold winter conditions. Minimize deformation, cracking and aging failure and ensure long-term reliable performance of molded parts.

Dalian Injection Molding



Related tags: DalianInjectionMolding

  • Add:No. 343, Jinwan Road, Zhanqian Street (Majia New Village), Jinzhou District, Dalian
    Add:No. 343, Jinwan Road, Zhanqian Street (Majia New Village), Jinzhou District, Dalian
  • E-mail:office@dlchenghua.cn
    E-mail:office@dlchenghua.cn
  • Tel:0411-87840676
    Tel:0411-87840676
Professional production enterprise engaged in plastic injection molding, extrusion and blow molding

1637907000586125.png

Wechat        Mobile

Dalian Chenghua plastic products Co., Ltd

Dalian Jinghe Molding Co., Ltd